Screw on Sofas legs

Prettypegs has 3 different fitting options

M8 Bolt (always included)
- Fits a large number of furniture brands and types.

Universal fitting plate
- For attaching Prettypegs on furniture without threads for M8-bolts. The plate fits most corner frames and flat surfaces and can be attached to furniture such as sofas, chairs, beds, storage furniture etc. 12mm screws included.

Table plate
- Always included when ordering our table legs. Can be attached to all table tops that is suitable to attach screws on (16mm screws - included).

Note! We don't recommend our legs for sofa beds, due to hidden bed inside most often have foldable legs that aren't adjustable.

M8 bolt (8mm width)

The bolts are always included and it is the most common size for furniture fittings. The bolt fits numerous furniture pieces. IKEA furniture that uses M8 bolts are:

SOFAS: Karlstad / Klippan / Karlsfors / Klobo / Mysinge / Ektorp / Söderhamn / Solsta / Ljungvik / Sandby / Oleby / Tidafors / Vaxholm / Härnösand / Skogaby / Stockholm (up to 3 seat) / Säter / Ystad / Landskrona / Dagarn / Norsborg

ARMCHAIRS: Mellby / Tullsta / Solsta-Olarp/ Karlstad / Karlsfors / Strandmon / Ekenäs / Muren / Skogaby /Söderhamn / Ystad / Landskrona

FOOTSTOOLS: Karlstad / Karlsfors / Klippan / Strandmon / Stocksund / Skee / Söderhamn / Ystad / Landskrona / Dagarn

STORAGE: The Bestå series

The M8 bolt fits a large number of sofas, beds for multiple furniture brands and manufacturers.

The bolt screws directly into your furniture (8mm pre-drilled) holes and you can always ask your furniture reseller if a M8 bolt fits your furniture.

Important: When attaching Prettypegs at storage furniture, like for example Ikea Bestå, make sure to screw down the bolt into the leg until it´s visible only 1, 5-2 cm. This so it wont risk to screw through the board where legs are mounted.

As with all furniture legs, remember to put felt pads on to protect your floor (not included), also be careful when turning your furniture over so you won't damage the legs or the floor!

Universal fitting plate
For furniture that do not take/support M8 bolts, choose our Universal fitting plate. The plate fits most corner frames and flat surfaces and can be attached to furniture such as sofas, chairs, beds, storage furniture etc.

Check underneath your furniture to see if it is possible to mount screws (length 12 mm). They should be fastened directly into the corners of the frame, so make sure there is enough space and depth and that the material is flat and suitable to attach screws. If the material is porous it could be necessary to use longer and thicker screws. Installing requires a screwdriver (12 mm screws are included).

1 - Fasten the plate with small screws in the corners of the furniture.
2 - Screw the bolt down in the peg - until it sticks out about 6 mm.
3 - Attach your pegs at the Universal plate by hand.

As with all furniture legs, remember to put felt pads on to protect your floor (not included), also be careful when turning your furniture over so you won't damage the legs or the floor.